Water Heater Stopped Suddenly? Here's What to Do Next
Water Heater Stopped Suddenly? Here's What to Do Next
Blog Article
They are making several great pointers relating to How to Troubleshoot and Repair an Electric Water Heater overall in this great article followed below.
Numerous modern homes make use of an electrical hot water heater for their furnace, due to its convenience and convenience of use. Nonetheless, much like any other electrical appliances, problems might arise with its use, unexpectedly. It can be really frustrating to awaken to a chilly shower rather than a hot one or having your bathroom with water that isn't warm adequate and even too hot. Whatever the case may be, water heater problems can be fairly stressful. Fortunately, we've made a checklist of feasible options to your water heater issues. There are a variety of aspects that could create many of these troubles, it could be an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the major power supply for safety. Whatever the problem is, getting it dealt with must not position way too much of a problem if you follow these actions:
Check Your Power Supply:
As standard as this might seem, it is really required. Without ample power, your water heater will certainly not work. So the first thing to do when your water instantly stops working is to validate that it isn't a power issue. Check if the fuse is blown out or the breaker tripped. If the breaker is the issue, just turn it off and on once more. Replace any kind of broken or damaged fuse. Evaluate the device with power after these modifications to see if it's currently working.
Examine the Burner in the Water Heater:
If it's not a power issue, after that try taking a look at your burner if it is still working. Check each of your heating elements to make sure the trouble isn't with any of them. If any of them is damaged, replace that part and after that examine whether the hot water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't hot sufficient, you might need to inspect the temperature level setups on your upper thermostat. Make sure the breaker is turned off before doing anything. Open the gain access to panel and also press the red switch for temperature level reset above the thermostat. This ought to aid heat the water. Turn the circuit breaker back on as well as inspect if the trouble has actually been resolved.
Call A Professional:
If after replacing all faulty parts as well as resetting your temperature, the hot water heater still isn't functioning, you might require to speak to a specialist plumber for a professional viewpoint. The issue with your heating unit could be that the cold and hot faucets have actually been switched over or it might be undersized for the quantity of warm water required in your home. Whatever the situation might be, an expert plumber would certainly assist fix the trouble.
Verdict
Hot water heater troubles are not always major. Many of them are due to minor problems like a blown fuse or damaged burner. Changing the malfunctioning components should suffice. Nevertheless, if you are still not able to resolve the issue, give a call to your closest plumber to come to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Do you really like reading about How to Troubleshoot and Repair an Electric Water Heater? Create a review below. We'd be glad to find out your views about this content. We are looking forward that you visit us again before long. Appreciated our blog posting? Please share it. Help someone else find it. Thank you for your time. Come back soon.
Start Now Report this page